%20-%20DOG.png){kind=avatar}
- Ultra Fast MPPT
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
- Remote Monitoring and Control
- The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
- Load Output
- Configure the voltage at which SmartSolar disconnects a load.
- Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.
Victron SmartSolar MPPT Charge Controller 250/100-Tr VE.CAN
Max. PV short circuit current 2): 70 A
Maximum efficiency: 98 %
Self-consumption: Less than 35 mA @ 12 V / 20 mA @ 48 V
Operating Temperature: -30 to +60C (full rated output up to 40C)
ENCLOSURE
Protection category: IP43 (electronic components), IP22 (connection area)